2018-07-25 13:57:48

Hunting FFP Rifle Scope with 30mm Telescopic Sight for Long Range Riflescope Sniper Tactical


  • Diamond Clear Image

  • Long Eye Relief

  • First Focal Plane Etched MPX1 Glass Reticle with Germany Tech

  • Turret Lock

  • 1/10 MIL Adjust

  • 30mm Monotube

  • Illumination

  • Side Focus

  • With Lens Cap, Honeycomb Sunshade, Tactical Rings                                                      

Tech Specification 

ModelSCFF-14SCFF-17 SCFF-11
Magnification  5-30x4-24x3-18x
Objective Lens Dia  56mm50mm50mm
Ocular Dia36mm (1.4 inch) 36mm36mm
Ocular Length60mm (2.3 inch) 60mm60mm
Exit Pupil 11-1.8mm12.5-2.1mm16.6-2.7mm
Overall length398mm (15.6 inch)380mm (15.0 inch)335mm (12.2 inch)
Weight (net) 813g (28.7 Ounce) 770g (27.2 ounce)750g (26.5 ounce)
Eye Relief100mm (4.0 Inch)100mm (4 inch)100mm (4 inch)
FOV (@100yds) 20.43-3.51 feet 9.1-1.5M 32.9-5.8 feet 
Optical CoatingDiamond Fully-Multi
Reticle Etched Glass MPX1
Elevation Range≥12MIL (40MOA)≥15MIL (50MOA)≥17.5MIL (60MOA)
Windage Range≥12MIL (40MOA)≥15MIL (50MOA)≥17.5MIL (60MOA)
Parallax Adjustment20 Yds to infinite15 Yds to infinite15 Yds to infinite
Tube Dia.30mm harmmer-forged
Click Value1/10 MIL, 1cm, 0.1 MRAD
Illumination6 levels red

• 30mm hammer-forged aluminum monotube design
• Side focus mark: 20, 25, 30, 40, 50, 75, 100, 200, 300, 500, 900 and infinite
• Shock tested to 1000g, water proof and fully nitrogen purged
• Turret lock sytem. Pull to adjust, press to lock. Two extra elevation turrets marked 1cm and 0.1 MRAD
• High quality 6061 T6 aircraft greade aluminum
• Diopter compensation from fast-focus eyepiece  -2 to +1.5
• Including items: 30mm tactical picatinny rings (default) or devetail mount ring (on request only), cleaning cloth, instruction,  lens cap, honeycomb filter sunshade, packed in nice retail box

FFP Brief Introduction:
Most scopes have the reticle fitted in the second focal plane (near the eyepiece). While, presently it has always been the practice to fit the reticle in the first focal plane (the reticle increases its size when change the magnification from low to high). Each system has its advantages.
The advantage with telemetric reticles (like rangefinder & Mil-dot etc) is that the target image and distance between dots remains constant even when changing magnification. It is the system that is widely used by the TOP military suppliers now.The following diagram A and B is for your reference upon the reticle size change when magnification change.